RecurringBilling Code Examples

This KB entry includes simple sample code for different gateways using RecurringBilling component.

Below are code examples for different gateways supported in the E-Payment Integrator. If you require additional sample code for a gateway please contact support@4dpayments.com.

Gateways

Authorize.Net
Authorize.Net CIM
BASYS
Beanstream
Chase/YourPay/FirstData/LinkPoint
CyberSource
eProcessing
eWay
GoToBilling
iTransact/NexCommerce
Litle
Merchant Partners
Moneris/Moneris USA
MyVirtualMerchant
NetworkMerchants/Payscape/TransNational/Verifi
Orbital
PayFlow Pro
Payments Gateway/ACH Payments
PayTrace
PayWiser
PhoeniXGate
Planet Payment
PlugNPay
QuickBooks Merchant Services (QBMS)
Repay
SkipJack
Square
TransFirst Classic (formerly PRIGate)
TransFirst (Transaction Central/Merchant Anywhere)
USA ePay

Authorize.Net

Create an ARB (Automatic Recurring Billing) service on Authorize.net:


Recurringbilling recurring = new Recurringbilling();
 
// Gateway deets
recurring.Gateway = RecurringbillingGateways.gwAuthorizeNet;
recurring.GatewayURL = "https://apitest.authorize.net/xml/v1/request.api";
recurring.MerchantLogin = "YourLogin";
recurring.MerchantPassword = "YourPassword";
 
// Customer deets
EPCustomer cust = new EPCustomer();
cust.FirstName = "John";
cust.LastName = "Smith";
cust.FullName = "John M. Smith";
cust.Address = "123 Nowhere Ln.";
cust.City = "Beverly Hills";
cust.State = "CA";
cust.Zip = "90210";
cust.Country = "USA";
cust.Phone = "555-555-5555";
cust.Email = "jsmith@fake.com";
cust.Id = "123456";
 
// Card deets
CCCard card = new CCCard();
card.Number = "4788250000028291"; // This is just a test card from authorize.net
card.ExpMonth = 12;
card.ExpYear = 2020;
card.EntryDataSource = EntryDataSources.edsManualEntryNoCardReader;
 
// Subscription deets
recurring.SubscriptionName = "YourSubscriptionName";
recurring.PaymentSchedule.StartDate = "04/15/2017";
recurring.PaymentSchedule.EndDate = "04/15/2018";
recurring.PaymentSchedule.Frequency = "1";
recurring.PaymentSchedule.FrequencyUnit = "M";
recurring.PaymentSchedule.RecurAmount = "00.01";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.Customer = cust;
recurring.Card = card;
 
// Create the subscription
recurring.CreateSubscription();

Authorize.Net CIM

Create a CIM profile on Authorize.net:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwAuthorizeNetCIM;
recurring.GatewayURL = "https://apitest.authorize.net/xml/v1/request.api";
 
//This is your Authorize.Net UserId / Name
recurring.MerchantLogin = "Name";
//This is your Authorize.Net Transaction Key
recurring.MerchantPassword = "TransactionKey";
 
recurring.Card.Number = "5424000000000015";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 21;
recurring.Card.CVVData = "999";
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Address = "1 Test Street";
recurring.Customer.City = "Test City";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "27717";
recurring.Customer.Country = "USA";
 
recurring.ShippingInfo.Address = "1st St.";
recurring.ShippingInfo.City = "1st City";
recurring.ShippingInfo.State = "NC";
recurring.ShippingInfo.Zip = "98765";
recurring.ShippingInfo.Country = "US";
 
recurring.TransactionId = "Sample";
recurring.Customer.Id = "123456789";
 
recurring.CreateSubscription();
 
Console.WriteLine("Profile Id : " + recurring.Response.SubscriptionId);
Console.WriteLine("Profile Payment Id : " + recurring.Config("AuthNetCIMPaymentProfileId"));
Console.WriteLine("Profile Shipping Id : " + recurring.Config("AuthNetCIMShippingAddressId"));

BASYS

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
string profileId;
string CCInfoID;
string contractID;
 
recurring.Gateway = RecurringbillingGateways.gwBASYS;
 
//This is your UserName
recurring.MerchantLogin = "UserName";
//This is your Password
recurring.MerchantPassword = "Password";
//This is your Merchant ID
recurring.Config("MerchantCode=YourMerchantID");
 
//This will create a Customer Profile.
recurring.Config("BASYSRequestType=0");
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    //profile was created successfully
    profileId = recurring.Response.SubscriptionId;
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
  Console.WriteLine("Profile Id: " + profileId);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Add Credit Card information.
 
recurring.Config("BASYSRequestType=1");
 
recurring.Config("BASYSCustomerKey=" + profileId);
recurring.Card.Number = "4788250000028291";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 18;
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // credit card profile was created successfully
    CCInfoID = recurring.Config("BASYSCardInfoKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Credit Card Profile : " + CCInfoID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Create Payment Schedule
 
//This will add a Payment Schedule information to an existing profile
recurring.Config("BASYSRequestType=3");
 
recurring.Config("BASYSCustomerKey=" + profileId);
 
//Default -- CC Payment Schedule
recurring.Config("BASYSPaymentType=0");
//This is the CCInfoID here:
recurring.Config("BASYSCardInfoKey=" + CCInfoID);
 
//This is set by the merchant.
recurring.Config("BASYSContractId=12345");
recurring.Customer.FirstName = "John";Pc
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
recurring.PaymentSchedule.RecurAmount = "2.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.EndDate = DateTime.Now.AddMonths(3).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.FrequencyUnit = "Weekly";
recurring.Config("BASYSNextBillingDate=" + DateTime.Now.AddDays(2).ToString("MM/dd/yyyy"));
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // payment schedule was created successfully
    contractID = recurring.Config("BASYSContractKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Contract ID : " + contractID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}

Beanstream

Create and update a subscription:


//This is the "merchant_id"
recurring.MerchantLogin = "218010000";
 
//This is the "username"
recurring.Config("BeanstreamUsername=nsoftware");
 
//This is the "password"
recurring.MerchantPassword = "password";
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Address = "1234 Main St";
recurring.Customer.Zip = "V8T5J1";
recurring.Customer.City = "Victoria";
recurring.Customer.State = "BC";
recurring.Customer.Country = "CA";
recurring.Customer.Email = "Test@test.com";
recurring.Customer.Phone = "9195555555";
 
recurring.Card.ExpMonth = 1;
recurring.Card.ExpYear = 2015;
recurring.Card.CVVData = "123";
recurring.Card.Number = "4030000010001234";
 
recurring.InvoiceNumber = "1234";
 
recurring.PaymentSchedule.FrequencyUnit = "M";
recurring.PaymentSchedule.Frequency = "1";
recurring.PaymentSchedule.RecurAmount = "10.00";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;
 
 
//When calling UpdateSubscription, CancelSubscription, or GetSubscriptionStatus
//this is the Recurring Billing API "passcode"
recurring.MerchantPassword = "201f5c38a85647E485BB8eaf17B7ED01";
recurring.Card = new CCCard();
recurring.Customer = new EPCustomer();
recurring.PaymentSchedule = new EPPaymentSchedule();
recurring.PaymentSchedule.RecurAmount = "20.00";
 
recurring.UpdateSubscription(subId);

Chase/YourPay/FirstData/LinkPoint

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwLinkPoint;
recurring.GatewayURL = "staging.linkpt.net:1129"; //Test URL
 
//This is your store number
recurring.MerchantLogin = "1909977744";
 
//The certificate is provided by the gateway
recurring.SSLCert = new Certificate(CertStoreTypes.cstPEMKeyFile, "..\\..\\files\\linkpoint.pem", "", "*");
 
recurring.Card.ExpMonth = 1;
recurring.Card.ExpYear = 16;
recurring.Card.Number = "4111111111111111";
 
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.TransactionId = DateTime.Now.Ticks.ToString();
recurring.InvoiceNumber = DateTime.Now.Ticks.ToString();
 
recurring.SubscriptionDesc = "Test Transaction";
recurring.PaymentSchedule.RecurAmount = "12." + DateTime.Now.Minute.ToString("00"); //Avoid duplicate transactions a bit
recurring.PaymentSchedule.TotalPayments = 10;
recurring.PaymentSchedule.StartDate = DateTime.Now.ToString("MM/dd/yyyy");
recurring.PaymentSchedule.FrequencyUnit = "M";
recurring.PaymentSchedule.Frequency = "1";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Note: Chase, YourPay, FirstData, and LinkPoint all use the same implementation.

CyberSource

Create a subscription:


recurring = new Recurringbilling();
recurring.Gateway = RecurringbillingGateways.gwCyberSource;
recurring.GatewayURL = "https://ics2wstest.ic3.com/commerce/1.x/transactionProcessor/";
 
//This is your username
recurring.MerchantLogin = "nsoft_test1";
 
//This is your transaction key generated from your merchant account online.
//Be sure to generate this for the SOAP API, not the Simple Order API.
recurring.MerchantPassword = "ruTCCovVZ2UMbfwG6a...LrS2xuoaubJrwA==";
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Doe";
recurring.Customer.Email = "nobody@cybersource.com";
recurring.Customer.Phone = "408-556-9100";
recurring.Customer.Address = "1295 Charleston Rd.";
recurring.Customer.City = "Mountain View";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "94043-1307";
recurring.Customer.Country = "US";
 
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 20;
recurring.Card.CVVData = "123";
 
recurring.InvoiceNumber = "12";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "weekly";
recurring.PaymentSchedule.TotalPayments = 50;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

eProcessing

Create a subscription:


//This is your eProcessingNetwork account number.
recurring.MerchantLogin = "080880";
recurring.MerchantPassword = "080880pw";
 
//Set this value if you have one
recurring.AddSpecialField("RestrictKey", "yGqqXJh0Pqnugfr");
 
recurring.Card.CVVData = "999";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.Number = "4111111111111111";
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
recurring.SubscriptionDesc = "Test Transaction";
 
recurring.SubscriptionName = "TestRecur";
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.RecurAmount = "10.00";
 
recurring.CreateSubscription();
 
string subID = recurring.Response.SubscriptionId;

eWay

The eWay gateway requires management of the customer profile and subscription profile separately. The “EwayTransactionType” configuration setting determines the type of request that is made. A customer must exist before creating a subscription profile.

Create a Customer:


//Create and Update a customer
recurring.Gateway = RecurringbillingGateways.gwEway;
recurring.GatewayURL = "https://www.eway.com.au/gateway/rebill/test/manageRebill_test.asmx";
 
//This is your eWay username
recurring.MerchantLogin = "support@test.com";
 
//This is your eWay password
recurring.MerchantPassword = "password";
 
//This is your eWay customer Id
recurring.Config("EwayCustomerId=91330478");
 
recurring.Card.Number = "4444333322221111";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
 
recurring.Config("EwayTransactionType=1"); //Customer
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.CreateSubscription();
 
string customerId = recurring.Response.TransactionId;
 
recurring.Customer.LastName = "Smith_Update";
recurring.UpdateSubscription(customerId);

Create a Subscription:


//Create a Subscription
recurring.Gateway = RecurringbillingGateways.gwEway;
recurring.GatewayURL = "https://www.eway.com.au/gateway/rebill/test/manageRebill_test.asmx";
 
//This is your eWay username
recurring.MerchantLogin = "support@nsoftware.com.sand";
 
//This is your eWay password
recurring.MerchantPassword = "Nsoft1111";
 
//This is your eWay customer Id
recurring.Config("EwayCustomerId=91330478");
 
recurring.Card.Number = "4444333322221111";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
 
 
recurring.Config("EwayTransactionType=0"); //Subscription (Rebill Event)
recurring.PaymentSchedule.InitialAmount = "100";
recurring.Config("EwayInitialDate=" + DateTime.Now.AddDays(1).ToString("MM/dd/yyyy"));
recurring.PaymentSchedule.RecurAmount = "500";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.EndDate = DateTime.Now.AddYears(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.FrequencyUnit = "Months";
recurring.PaymentSchedule.Frequency = "1";
 
recurring.TransactionId = customerId; //Previously created customer Id
recurring.SubscriptionDesc = "Test";
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

GoToBilling

The GoToBilling gateway requires management of the customer, account, and recurring billing profile separately. The “GoToBillingTransactionType” configuration setting determines the type of request that is made. Both a customer and account must exist before creating a subscription profile.

Create a Customer:


//Create and Update Customer
 
recurring.Gateway = RecurringbillingGateways.gwGoToBilling;
 
//This is your 6 digit MID
recurring.MerchantLogin = "123456";
//This is your 6 digit PIN
recurring.MerchantPassword = "123456";
 
recurring.Card.Number = "6011000000000012";
recurring.Card.ExpMonth = 4;
recurring.Card.ExpYear = 2015;
recurring.Card.CVVData = "999";
recurring.Customer.Id = "0000";
recurring.Customer.Address = "123 Nowhere Ln";
recurring.Customer.Zip = "90210";
recurring.Customer.Country = "840";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.Phone = "555-123-4567";
recurring.Customer.FirstName = "FirstName";
recurring.Customer.LastName = "LastName";
recurring.InvoiceNumber = "1234";
recurring.PaymentSchedule.RecurAmount = "10.00";
 
recurring.Config("GoToBillingTransactionType=1"); // Customer
recurring.SubscriptionName = "CustomerTest";
 
recurring.CreateSubscription();
 
string customerId = recurring.Response.SubscriptionId;
 
recurring.Customer.State = "NC";
recurring.Customer.Phone = "";
 
recurring.UpdateSubscription(customerId);

Create an Account:


//Create an Account
 
recurring.Gateway = RecurringbillingGateways.gwGoToBilling;
 
//This is your 6 digit MID
recurring.MerchantLogin = "123456";
//This is your 6 digit PIN
recurring.MerchantPassword = "123456";
 
recurring.Config("GoToBillingTransactionType=2"); // 2 = Account
recurring.Customer.Id = customerId; //Previously created customer
 
recurring.CreateSubscription();
 
string accountId = recurring.Response.SubscriptionId;

Create a Recurring Transaction:


//Create a Recurring Transaction
 
recurring.Gateway = RecurringbillingGateways.gwGoToBilling;
 
//This is your 6 digit MID
recurring.MerchantLogin = "123456";
//This is your 6 digit PIN
recurring.MerchantPassword = "123456";
 
recurring.Config("GoToBillingTransactionType=0"); // 0 = Transaction
 
recurring.Customer.Id = customerId; //Previously created customer
recurring.TransactionId = accountId; //Previously created account
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.TotalPayments = 12;
 
recurring.CreateSubscription();

iTransact/NexCommerce

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwITransact;
 
//vendor ID
recurring.MerchantLogin = "12345";
recurring.MerchantPassword = ""; //No password required
 
recurring.Card.CVVData = "";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.Number = "5454545454545454";
 
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "monthly";
recurring.PaymentSchedule.TotalPayments = 12;
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Note: iTransact and NexCommerce use the same implementation.

Litle

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwLitle;
recurring.GatewayURL = "https://prelive.litle.com/vap/communicator/online";
 
//Your Username
recurring.MerchantLogin = "TestUser";
 
//Your Password
recurring.MerchantPassword = "password";
 
//Your Merchant ID
recurring.Config("MerchantCode=123456");
 
recurring.Card.Number = "4012002000060016";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 2025;
recurring.Card.CVVData = "123";
recurring.Customer.Address = "123 Nowhere Ln.";
recurring.Customer.Zip = "90210";
recurring.PaymentSchedule.InitialAmount = "100";
 
recurring.InvoiceNumber = "IN123456789";
 
recurring.AddSpecialField("id", "NS987654321");
recurring.Customer.Id = "Cust31";
recurring.TransactionId = "ANNUAL_PLAN";
recurring.PaymentSchedule.RecurAmount = "4000";
recurring.PaymentSchedule.TotalPayments = 6;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Merchant Partners

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwMerchantPartners;
 
//Merchant ID
recurring.MerchantLogin = "DEMO1";
 
//Merchant PIN
recurring.MerchantPassword = "cL68s0srQbrhcPrTnxe9H8NT4rCvKG7x";
 
//Merchant Sub ID
recurring.AddSpecialField("subid", "00002");
 
recurring.Card.Number = "4003000123456781";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "123";
 
recurring.Customer.FullName = "John Doe";
recurring.Customer.Address = "123 Nowhere Ln";
recurring.Customer.Zip = "90210";
recurring.Customer.Country = "840";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "2";
recurring.PaymentSchedule.TotalPayments = 12;
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Moneris/Moneris USA

Create a subscription:


//isUSA is a boolean value that determine whether to use the USA environment or the Canadian environment
bool isUSA = true;
Recurringbilling recurring = new Recurringbilling();
 
if (isUSA)
{
  recurring.Gateway = RecurringbillingGateways.gwMonerisUSA;
 
  //Test URL
  recurring.GatewayURL = "https://esplusqa.moneris.com/gateway_us/servlet/MpgRequest";
 
  //Your store_id
  recurring.MerchantLogin = "monusqa005";
 
  //your api_token
  recurring.MerchantPassword = "qatoken";
}
else
{
  recurring.Gateway = RecurringbillingGateways.gwMoneris;
 
  //Test URL
  recurring.GatewayURL = "https://esqa.moneris.com/gateway2/servlet/MpgRequest";
 
  //Your store_id
  recurring.MerchantLogin = "store5";
 
  //your api_token
  recurring.MerchantPassword = "yesguy";
}
 
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.Number = "5454545454545454";
recurring.Card.CVVPresence = CCCVVPresences.cvpNotProvided;
 
recurring.InvoiceNumber = DateTime.Now.Ticks.ToString();
 
recurring.Customer.Id = "987654321";
recurring.AddSpecialField("start_now", "true");
recurring.PaymentSchedule.InitialAmount = "5.00";
recurring.PaymentSchedule.RecurAmount = "10.00"; //Test environment will not approve anything over $11.00
recurring.PaymentSchedule.FrequencyUnit = "month";
recurring.PaymentSchedule.Frequency = "1";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(5).ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

MyVirtualMerchant

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwMyVirtualMerchant;
 
//Merchant ID
recurring.MerchantLogin = "123456";
 
//PIN
recurring.MerchantPassword = "654321";
 
//User ID
recurring.Config("MyVirtualMerchantUserId=123456");
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Address = "123 Nowhere Ln";
recurring.Customer.Zip = "90210";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.State = "CA";
recurring.Customer.Country = "USA";
recurring.Customer.Email = "x@y.com";
 
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 1;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "999";
 
recurring.TransactionId = "1234";
recurring.InvoiceNumber = "123456";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "MONTHLY";
recurring.PaymentSchedule.StartDate = "03/07/2014";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

NetworkMerchants/Payscape/TransNational/Verifi

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwNetworkMerchants;
 
//This is your username
recurring.MerchantLogin = "demo";
 
//This is your password
recurring.MerchantPassword = "password";
 
recurring.MerchantLogin = "demo";
recurring.MerchantPassword = "password";
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 17;
recurring.Card.CVVData = "123";
recurring.Customer.Address = "123 Nowhere Ln";
recurring.Customer.Zip = "90210";
recurring.Customer.Country = "840";
 
recurring.SubscriptionName = "monthly";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Note: NetworkMerchants, Payscape, TransNational, and Verifi all use the same implementation.

Orbital

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwOrbital;
recurring.GatewayURL = "https://orbitalvar1.paymentech.net/authorize";
 
//Your Merchant ID
recurring.MerchantLogin = "123456789012";
 
//Your BIN number
recurring.MerchantPassword = "000002";
 
recurring.Card.Number = "4012888888881";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 14;
recurring.Card.CVVData = "123";
 
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.Address2 = "Suite 123";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.SubscriptionDesc = "Test Transaction";
recurring.PaymentSchedule.RecurAmount = "100";
recurring.PaymentSchedule.StartDate = "04/12/2014";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.Frequency = "1 * ?";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

PayFlow Pro

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPayFlowPro;
recurring.GatewayURL = "https://pilot-payflowpro.paypal.com"; //test URL
 
//Your Merchant ID
recurring.MerchantLogin = "userid";
 
//Your Password
recurring.MerchantPassword = "password";
 
//The ID of your PayPal Reseller
recurring.AddSpecialField("PARTNER", "PayPal");
 
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.Number = "4222222222222";
 
recurring.SubscriptionName = "CustomerTest1";
recurring.PaymentSchedule.InitialAmount = "1.00";
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Payments Gateway/ACH Payments

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPaymentsGateway;
recurring.GatewayURL = "https://www.paymentsgateway.net/cgi-bin/posttest.pl"; //Test URL
 
//Your Merchant ID
recurring.MerchantLogin = "123456";
 
//Your Password
recurring.MerchantPassword = "abc123";
 
recurring.Card.Number = "4200000000000000";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
 
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.InvoiceNumber = "123456789";
 
recurring.PaymentSchedule.InitialAmount = "1.00";
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

PayTrace

Create a Customer Account:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPayTrace;
recurring.GatewayURL = "https://paytrace.com/api/default.pay";
 
//Merchant ID
recurring.MerchantLogin = "demo123";
 
//Password
recurring.MerchantPassword = "demo123";
 
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 1;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "999";
recurring.Timeout = 600;
recurring.Customer.Address = "8320";
recurring.Customer.Zip = "85284";
recurring.Config("PayTraceTransactionType=0"); // 0 = Customer
 
recurring.CreateSubscription();
 
string custId = recurring.Response.TransactionId;

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPayTrace;
recurring.GatewayURL = "https://paytrace.com/api/default.pay";
 
//Merchant ID
recurring.MerchantLogin = "demo123";
 
//Password
recurring.MerchantPassword = "demo123";
 
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 1;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "999";
recurring.Timeout = 600;
recurring.Customer.Address = "8320";
recurring.Customer.Zip = "85284";
 
recurring.Config("PayTraceTransactionType=1"); // 1 = Recurring Billing
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.Frequency = "1";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddMonths(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.TotalPayments = 12;
recurring.TransactionId = custId; //Customer ID created above
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

PayWiser

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
string RecurringPlanId;
string CardToken;
 
recurring.Gateway = RecurringbillingGateways.gwPayWiser;
recurring.GatewayURL = "https://gateway.paywiser.eu/PaymentGatewayTest/PayWiserPG/";
 
//This is your API Key
recurring.MerchantLogin = "YourAPIKey";
 
// Create Recurring Plan
recurring.Config("PayWiserRequestType=0");
 
//These are required fields
recurring.SubscriptionDesc = "Test Monthly Recurring Plan";
recurring.AddSpecialField("StatementText", "Test");
recurring.AddSpecialField("StatementDescription", "Test Statement Description");
 
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.TotalPayments = 10;
 
recurring.AddSpecialField("IsRecurring", "false");
recurring.AddSpecialField("MaxRetryCount", "0");
recurring.Config("PayWiserPaymentHour=10");
recurring.AddSpecialField("RenewYearly", "false");
 
//This should be unique for each transaction
recurring.TransactionId = "1111111";
 
try
{          
  recurring.CreateSubscription();
 
  if (recurring.Response.Approved) {
 
    //Recurring Plan was created successfully
    RecurringPlanId = recurring.Response.SubscriptionId;
    Console.WriteLine("Recurring Plan Id: " + RecurringPlanId);
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.ErrorText);                 
  }
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw;
}
 
//Next Step is to Tokenize the Credit Card
 
recurring.Config("PayWiserRequestType=1"); //This will generate a Token
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Card.Number = "4788250000028291";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 18;
recurring.Card.CVVData = "999";
 
//This should be unique for each transaction
recurring.TransactionId = "1111112";
 
try
{          
  recurring.CreateSubscription();
 
  if (recurring.Response.Approved) {
 
    //Token was created successfully
    CardToken = recurring.Config("PayWiserCardToken");
    Console.WriteLine("Card Token: " + CardToken);
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.ErrorText);             
  }
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw;
}
 
//Create Recurring Payment
 
recurring.Config("PayWiserRequestType=2"); //This will start Recurring Payment
 
recurring.Config("PayWiserCardToken=" + CardToken);
recurring.Config("PayWiserRecurringPlanId=" + RecurringPlanId);
 
recurring.PaymentSchedule.StartDate = recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("yyyy-MM-dd");
recurring.PaymentSchedule.TrialPayments = 1;
recurring.PaymentSchedule.RecurAmount = "200";
recurring.AddSpecialField("AdjustPlanWithStartDate", "false");
 
//This should be unique for each transaction
recurring.TransactionId = "1111113";
 
try
{
  recurring.CreateSubscription();
 
  if (recurring.Response.Approved)
  {
    //Recurring Payment was started successfully
    Console.WriteLine("Recurring Reference Id: " + recurring.TransactionId);
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.ErrorText);
  }
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw;
}

PhoeniXGate

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
string profileId;
string CCInfoID;
string contractID;
 
recurring.Gateway = RecurringbillingGateways.gwPhoeniXGate;
 
//This is your UserName
recurring.MerchantLogin = "UserName";
//This is your Password
recurring.MerchantPassword = "Password";
//This is your Merchant ID
recurring.Config("MerchantCode=YourMerchantID");
 
//This will create a Customer Profile.
recurring.Config("PhoeniXGateRequestType=0");
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    //profile was created successfully
    profileId = recurring.Response.SubscriptionId;
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
  Console.WriteLine("Profile Id: " + profileId);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Add Credit Card information.
 
recurring.Config("PhoeniXGateRequestType=1");
 
recurring.Config("PhoeniXGateCustomerKey=" + profileId);
recurring.Card.Number = "4788250000028291";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 18;
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // credit card profile was created successfully
    CCInfoID = recurring.Config("PhoenixGateCardInfoKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Credit Card Profile : " + CCInfoID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Create Payment Schedule
 
//This will add a Payment Schedule information to an existing profile
recurring.Config("PhoeniXGateRequestType=3");
 
recurring.Config("PhoeniXGateCustomerKey=" + profileId);
 
//Default -- CC Payment Schedule
recurring.Config("PhoeniXGatePaymentType=0");
//This is the CCInfoID here:
recurring.Config("PhoeniXGateCardInfoKey=" + CCInfoID);
 
//This is set by the merchant.
recurring.Config("PhoeniXGateContractId=12345");
recurring.Customer.FirstName = "John";Pc
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
recurring.PaymentSchedule.RecurAmount = "2.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.EndDate = DateTime.Now.AddMonths(3).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.FrequencyUnit = "Weekly";
recurring.Config("PhoeniXGateNextBillingDate=" + DateTime.Now.AddDays(2).ToString("MM/dd/yyyy"));
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // payment schedule was created successfully
    contractID = recurring.Config("PhoenixGateContractKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Contract ID : " + contractID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}

Planet Payment

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPlanetPayment;
recurring.GatewayURL = "https://uap.txngw.com";
 
//Your Company Key
recurring.MerchantLogin = "8990";
 
//your PIN
recurring.MerchantPassword = "1234";
 
//Your terminal ID
recurring.Config("TerminalId=6177");
 
recurring.Card.Number = "4000009999999991";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 17;
recurring.Card.CVVData = "907";
 
recurring.Customer.FullName = "J.J.J. Smith";
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Address = "123 Nowhere Ln";
recurring.Customer.Zip = "90210";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.State = "CA";
recurring.Customer.Country = "US";
recurring.Customer.Email = "x@y.com";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.FrequencyUnit = "MONTHLY";
recurring.PaymentSchedule.Frequency = "1";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
recurring.Config("PlanetPaymentFrequencyDate=" + DateTime.Now.AddDays(2).Day.ToString());
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

PlugNPay

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwPlugNPay;
 
//Your Merchant ID
recurring.MerchantLogin = "pnpdemo2";
 
//Your Password
recurring.MerchantPassword = "55pnpdemo55";
 
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "";
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.Country = "USA";
 
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = "02/08/2014";
recurring.SubscriptionName = "testrecur1";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

QuickBooks Merchant Services (QBMS)

Create a wallet:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwQBMS;
recurring.GatewayURL = "https://merchantaccount.ptc.quickbooks.com/j/AppGateway";
 
//Your App Login
recurring.MerchantLogin = "qbms_demo_april_2014.domain.com";
 
//Your Connection ID
recurring.MerchantPassword = "connection_id";
 
recurring.Customer.Address = "123 Nowhere Ln.";
recurring.Customer.Zip = "90210";
 
recurring.Customer.Id = "123456789";
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 2025;
recurring.Card.CVVData = "123";
 
recurring.Config("QBMSTransactionType=0"); //Wallet
recurring.CreateSubscription();
 
string walletId = recurring.Response.TransactionId;

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
 
recurring.Gateway = RecurringbillingGateways.gwQBMS;
recurring.GatewayURL = "https://merchantaccount.ptc.quickbooks.com/j/AppGateway";
 
//Your App Login
recurring.MerchantLogin = "qbms_demo_april_2014.domain.com";
 
//Your Connection ID
recurring.MerchantPassword = "connection_id";
 
recurring.Customer.Address = "123 Nowhere Ln.";
recurring.Customer.Zip = "90210";
 
recurring.Config("QBMSTransactionType=1"); //Scheduled Billing
recurring.Customer.Id = "123456789";
recurring.TransactionId = walletId; //Wallet ID created above
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.Frequency = "0 0 0 10 * ?";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Repay

Create a subscription:


Recurringbilling recurring = new Recurringbilling();
string profileId;
string CCInfoID;
string contractID;
 
recurring.Gateway = RecurringbillingGateways.gwRepay;
 
//This is your UserName
recurring.MerchantLogin = "UserName";
//This is your Password
recurring.MerchantPassword = "Password";
//This is your Merchant ID
recurring.Config("MerchantCode=YourMerchantID");
 
//This will create a Customer Profile.
recurring.Config("RepayRequestType=0");
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    //profile was created successfully
    profileId = recurring.Response.SubscriptionId;
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
  Console.WriteLine("Profile Id: " + profileId);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Add Credit Card information.
 
recurring.Config("RepayRequestType=1");
 
recurring.Config("RepayCustomerKey=" + profileId);
recurring.Card.Number = "4788250000028291";
recurring.Card.ExpMonth = 12;
recurring.Card.ExpYear = 18;
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // credit card profile was created successfully
    CCInfoID = recurring.Config("RepayCardInfoKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Credit Card Profile : " + CCInfoID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}
 
//Create Payment Schedule
 
//This will add a Payment Schedule information to an existing profile
recurring.Config("RepayRequestType=3");
 
recurring.Config("RepayCustomerKey=" + profileId);
 
//Default -- CC Payment Schedule
recurring.Config("RepayPaymentType=0");
//This is the CCInfoID here:
recurring.Config("RepayCardInfoKey=" + CCInfoID);
 
//This is set by the merchant.
recurring.Config("RepayContractId=12345");
recurring.Customer.FirstName = "John";Pc
recurring.Customer.LastName = "Smith";
recurring.Customer.Id = "1001";
recurring.Customer.Address = "123 Main St";
recurring.Customer.City = "MyCity";
recurring.Customer.State = "NC";
recurring.Customer.Zip = "12345";
 
recurring.PaymentSchedule.RecurAmount = "2.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(1).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.EndDate = DateTime.Now.AddMonths(3).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.FrequencyUnit = "Weekly";
recurring.Config("RepayNextBillingDate=" + DateTime.Now.AddDays(2).ToString("MM/dd/yyyy"));
 
try
{
  recurring.CreateSubscription();
  if (recurring.Response.Approved)
  {
    // payment schedule was created successfully
    contractID = recurring.Config("RepayContractKey");
  }
  else
  {
    //There was an issue.
    throw new Exception(recurring.Response.Text);
  }
 
  Console.WriteLine("Contract ID : " + contractID);
}
catch (Exception ex)
{
  Console.WriteLine("Request: " + recurring.Config("RawRequest"));
  Console.WriteLine("***************");
  Console.WriteLine("Response: " + recurring.Response.Data);
  throw ex;
}

SkipJack

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwSkipjack;
 
//This is your HTML Serial Number
recurring.MerchantLogin = "000000000000";
 
//This is your Developer Serial Number
recurring.Config("TerminalId=987654321098");
 
recurring.Card.Number = "4242424242424242";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
 
recurring.Customer.Address = "1234 Nowhere Ln";
recurring.Customer.City = "Beverly Hills";
recurring.Customer.Country = "US";
recurring.Customer.Email = "nobody@server.com";
recurring.Customer.FirstName = "John";
recurring.Customer.Id = "CUSTOMER1";
recurring.Customer.LastName = "Smith";
recurring.Customer.Phone = "555-555-5555";
recurring.Customer.State = "CA";
recurring.Customer.Zip = "90210";
 
recurring.InvoiceNumber = "12345";
recurring.PaymentSchedule.RecurAmount = "10.00";
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(5).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.Frequency = "3"; // 3 = Monthly
recurring.PaymentSchedule.TotalPayments = 12;
recurring.SubscriptionName = "Item1";
recurring.SubscriptionDesc = "Item1";
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

Square

The RecurringBilling component is used to create, retrieve, update, and delete Square customer profiles, and to create and delete cards on those profiles.


Recurringbilling rb = new Recurringbilling();
rb.Gateway = RecurringbillingGateways.gwSquare;
 
// This your access token.
rb.MerchantLogin = "YOUR ACCESS TOKEN";
 
 
// First, create a profile.
// Note that the customer's names, email, and phone are set using the Customer fields...
rb.Customer.FirstName = "Fake";
rb.Customer.LastName = "Person";
rb.Config("CompanyName=CoolWidgets");
rb.AddSpecialField("nickname", "Fakie");
rb.Customer.Email = "fake@fake.com";
rb.Customer.Phone = "1234567890";
// ...but their physical address details are set using the ShippingInfo fields!
rb.ShippingInfo.Address = "456 WhereAmI Dr";
rb.ShippingInfo.Address2 = "Apt 0";
rb.ShippingInfo.City = "Secret";
rb.ShippingInfo.State = "NC";
rb.AddSpecialField("address.administrative_district_level_2", "Cool County");
rb.ShippingInfo.Zip = "77777";
rb.ShippingInfo.Country = "US";
 
// The SquareRequestType configuration setting controls whether the CreateSubscription()
// and CancelSubscription() methods operate against an overall customer profile (0), or
// a card saved to a customer profile (1). The default is 0 (customer profile); we set it
// explicitly here for the purpose of the example.
rb.Config("SquareRequestType=0");
rb.CreateSubscription();
 
// Now that the profile was created, we can get the customer Id associated with it.
string customerId = rb.Customer.Id;
 
 
// Let's recreate the RecurringBilling component before continuing, to simulate
// a real-world scenario where a customer profile is already created.
rb = new Recurringbilling();
rb.Gateway = RecurringbillingGateways.gwSquare;
rb.MerchantLogin = "YOUR ACCESS TOKEN";
 
 
// Now, imagine we want to update some part of a customer's information. It is important
// that we retrieve the latest customer profile details first, otherwise when we send
// the update request, we would end up removing any empty fields!
// (A side note: Square does not allow updating cards, only customer details. You can
// only create and delete cards.)
 
// Let's retrieve the customer we created earlier. First, we set the customer Id value...
rb.Customer.Id = customerId;
// ...then we call GetSubscriptionStatus(). (The method argument is ignored.)
rb.GetSubscriptionStatus("");
 
 
// Now that the RecurringBilling component is populated with the latest customer profile
// information, we can change what we want to change, and then call UpdateSubscription()
// to send the update request.
rb.ShippingInfo.Address2 = "";
rb.UpdateSubscription("");
 
 
// Now, let's try adding a card to the profile. Similar to when using the ICharge component,
// Square will not accept raw card details, only a card nonce created using a Square payment
// form. We'll use a test card nonce from https://docs.connect.squareup.com/testing/test-values
rb.Config("CardToken=fake-card-nonce-ok");
// Use the Customer fields to fill in the card's billing information. (Note that the FirstName
// and LastName fields themselves are technically ignored, but if you don't specify a value for
// the FullName field, the RecurringBilling component will automatically create one by joining
// the values specified for FirstName and LastName.)
rb.Customer.FullName = "Fake Person";
rb.Customer.Address = "123 Nowhere Ln";
rb.Customer.Address2 = "Apt 999";
rb.Customer.City = "Chapel Hill";
rb.Customer.State = "NC";
rb.AddSpecialField("billing_address.administrative_district_level_2", "Orange County");
rb.Customer.Zip = "94103"; // ("94103" must be the billing zip when using the fake card nonce.)
rb.Customer.Country = "US";
 
// Remember, we have to set SquareRequestType to 1 to create or delete cards.
rb.Config("SquareRequestType=1");
rb.CreateSubscription();
 
// Now, you can store the card Id. When using the ICharge component, it's possible to use a
// combination of the customer Id plus a customer card Id as a payment method (instead of a
// card nonce). See https://4dpayments.com/kb/epayment-gateway-code-examples/#square for more details.
string custCardId = rb.Config("SquareCustomerCardId");
 
 
// Now, let's retrieve the overall profile again.
rb.Customer.Id = customerId;
rb.GetSubscriptionStatus("");
 
// In addition to the customer's basic information, this will now also return the information
// of all of the cards that are saved to the customer profile. The SquareCustomerCardCount
// configuration setting reflects the number of cards saved to the profile...
Console.WriteLine("There are " + rb.Config("SquareCustomerCardCount") + " cards on the profile");
 
// ...and the SquareCustomerCardIndex configuration setting controls which card's details the
// RecurringBilling component is currently populated with. Our profile only has one card on it
// (and the index will automatically be set to 0 if there are any cards), but we'll set this
// explicitly for the purpose of the example.
rb.Config("SquareCustomerCardIndex=0");
// To have the component reset the fields used to reflect retrieved card data (see the docs for
// the RecurringBilling component for information on which fields those are), just set the index
// to -1:
rb.Config("SquareCustomerCardIndex=-1");
 
 
// Now, let's reset the RecurringBilling component again.
rb = new Recurringbilling();
rb.Gateway = RecurringbillingGateways.gwSquare;
rb.MerchantLogin = "YOUR ACCESS TOKEN";
 
 
// This time, we'll delete the card (that we added previously) from the profile.
rb.Customer.Id = customerId;
rb.Config("SquareCustomerCardId=" + custCardId);
rb.Config("SquareRequestType=1"); // So we will delete the card, not the profile!
rb.CancelSubscription("");
 
 
// Now, let's delete the whole profile. (Note that, if there were any cards on the profile, this
// would delete them too. In our example there are no cards though.)
rb.Customer.Id = customerId;
rb.Config("SquareRequestType=0");
rb.CancelSubscription("");

TransFirst Classic (formerly PRIGate)

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwPRIGate;
 
//This is your merchant number (assigned by TransFirst)
recurring.MerchantLogin = "12345678";
 
//This is your TransFirst Security Key
recurring.MerchantPassword = "ABCDE12345";
 
recurring.Card.Number = "371449635392376";
recurring.Card.ExpMonth = 01;
recurring.Card.ExpYear = 2015;
 
recurring.Customer.Address = "123 Main";
recurring.Customer.Zip = "97229";
 
recurring.PaymentSchedule.RecurAmount = "1.00";
recurring.InvoiceNumber = DateTime.Now.Ticks.ToString();
recurring.SubscriptionDesc = "Test transaction";
 
recurring.PaymentSchedule.Frequency = "Monthly";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.ToString("MM/dd/yy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

TransFirst (Transaction Central/Merchant Anywhere)

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwTransactionCentral;
 
//This is your account number (assigned by TransFirst)
recurring.MerchantLogin = "00000";
 
//This is your password
recurring.MerchantPassword = "ABCDE12345FGHIJ";
 
// This is the only card data that is valid for testing.  It fails but allows you to verify parsing the request.
recurring.Card.Number = "4111111111111111";
recurring.Card.ExpMonth = 01;
recurring.Card.ExpYear = 2015;
recurring.Card.CVVData = "999";
 
recurring.Customer.Address = "123 Main";
recurring.Customer.Zip = "97229";
 
recurring.PaymentSchedule.RecurAmount = random.Next(1, 100).ToString() + ".00";
recurring.InvoiceNumber = DateTime.Now.Ticks.ToString();
recurring.SubscriptionDesc = "Test transaction";
 
recurring.PaymentSchedule.Frequency = "M";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.ToString("MM/dd/yyyy");
 
recurring.CreateSubscription();
 
string subId = recurring.Response.SubscriptionId;

USA ePay

Create a subscription:


recurring.Gateway = RecurringbillingGateways.gwUSAePay;
 
//This is your UMKey/source key
recurring.MerchantLogin = "_Fc5a9...1OR7A";
 
//MerchatPassword is not used
recurring.MerchantPassword = "";
 
recurring.Card.EntryDataSource = EntryDataSources.edsManualEntryTrack1Capable;
recurring.Card.Number = "4005562233445564";
recurring.Card.ExpMonth = 2;
recurring.Card.ExpYear = 15;
recurring.Card.CVVData = "";
 
recurring.Customer.FirstName = "John";
recurring.Customer.LastName = "Smith";
 
recurring.PaymentSchedule.Frequency = "monthly";
recurring.PaymentSchedule.TotalPayments = 12;
recurring.PaymentSchedule.StartDate = DateTime.Now.AddDays(2).ToString("MM/dd/yyyy");
recurring.PaymentSchedule.RecurAmount = "9.99";
recurring.PaymentSchedule.InitialAmount = "10.00";
 
recurring.CreateSubscription();